Pilot mills Type 23F


APPLICATION:

The Pilot mills are designed to mill segments in casing, tubing, boxes, locks, shanks and packers during workover in oil, gas and exploratory wells.

 

CONSTRUCTION:

The Pilot mill consists of a body made from high-strength alloy steel. The shank (pilot) is fixed in the bottom end of the central part. The upper part of the body has a connecting thread, the bottom and side surfaces of the body and shank have holes with channels for effective cooling, intensive washing and retrieving chips, the bottom tape surfaces and shank have cutting elements.

Pilot mill type 20F is designed for milling explosive aluminum packers type ВП in casing and have cutting inserts from quick-cutting steel type P18.

Pilot mill type 23F is designed for destroying metal subjects and cemented metal subjects both in casings and in open stem. Pilot mills have tungsten-carbide particles intruded into a brass-containing matrix. Surfacing is manufactured in two types: lain and toothed.

 

When ordering, please specify:

 

Assembly name and size;

 

Mill OD, if other than stated in the table;

 

Pilot OD, if other than stated in the table;

 

Version (LH or RH);

 

Connecting thread, if other than stated in the table;

 

For mills type 23F - Tungsten carbide grains size (fine, middle, large);

 

Assembly name and size OD Pilot OD Connecting thread
мм inch мм inch
23F 86-38 86,3 3 13/32 38 1 1/2 З-44 NC-16
23F 90-38 90 3 17/32 38 1 1/2 З-44 NC-16
23F 92-47 92 3 5/8 47 1 27/32 З-44 NC-26
23F 99-47 99 3 29/32 47 1 27/32 З-66 2 3/8 Reg
23F 103-47 103 4 1/16 47 1 27/32 З-66 2 3/8 Reg
23F 108-47 108 4 1/4 47 1 27/32 З-73 NC-26
23F 110-47 110 4 11/32 47 1 27/32 З-73 NC-26
23F 112-47 112 4 13/32 47 1 27/32 З-76 2 7/8 Reg
23F 114-47 114,3 4 1/2 47 1 27/32 З-76 2 7/8 Reg
23F 116-47 116 4 9/16 47 1 27/32 З-76 2 7/8 Reg
23F 118-47 118 4 21/32 47 1 27/32 З-76 2 7/8 Reg
23F 120-57 120 4 23/32 57 2 1/4 З-76 2 7/8 Reg
23F 130-57 130 5 1/8 57 2 1/4 З-76 2 7/8 Reg
23F 136-57 136 5 11/32 57 2 1/4 З-76 2 7/8 Reg
23F 140-57 140 5 1/2 57 2 1/4 3-88 3 1/2 Reg
23F 146-72 145,8 5 3/4 72 2 27/32 3-88 3 1/2 Reg
23F 150-74 150 5 29/32 74 2 29/32 З-88 3 1/2 Reg
23F 156-74 156 6 5/32 74 2 29/32 З-88 3 1/2 Reg
23F 164-74 164 6 15/32 74 2 29/32 З-88 3 1/2 Reg
23F 168-74 168 6 5/8 74 2 29/32 З-88 3 1/2 Reg
23F 180-85 180 7 3/32 85 3 11/32 З-133 NC 50
23F 187-85 187 7 3/8 85 3 11/32 З-133 NC 50
23F 191-85 191 7 17/32 85 3 11/32 З-133 NC 50
23F 206-85 206 8 1/8 85 3 11/32 З-133 NC 50
23F 212-85 212,5 8 3/8 85 3 11/32 З-133 NC 50
23F 216-85 216,5 8 17/32 85 3 11/32 З-133 NC 50
All sizes in inches are presented as reference values and may differ from the size in millimeters max +/-1/64".
Please indicate in your order if you need strict inch system of computation.
«Sib Trade Service» © 2016